-40%

Darkglass Electronics B7UV2A Microtubes B7K Ultra w/ Aux In - Used

$ 211.19

Availability: 60 in stock
  • Brand: Darkglass
  • Type: Overdrive
  • UPC: 6430054580434
  • Analog/Digital: Analog
  • Model: Darkglass B7K ULTRA V2 (AUX-IN)
  • EAN: 6430054580434
  • MPN: B7K ULTRA V2 (AUX-IN)
  • To Fit: Bass Guitar
  • Condition: Used

    Description

    ProAudioStar
    DJ GEAR
    INSTRUMENT GEAR
    LIVE SOUND
    RECORDING
    MICROPHONES
    HEADPHONES
    ACCESSORIES
    SOFTWARE
    LIGHTING
    BUNDLES
    Authorized Dealer - Full Warranty
    Darkglass Electronics B7UV2A Microtubes B7K Ultra w/ Aux In - Used
    Bass Preamp Pedal
    - Used -
    Description
    Master
    Whereas the Level Knob controls the output of the overdrive section the Master volume adjusts the overall volume of the unit. Ideal for fine tuning the output on clean mode. It also serves as a DI level control.
    Blend
    Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.
    Level
    Sets the volume of the overdriven signal.
    Drive
    Sets the amount of saturation in the overdriven signal.
    Attack Switch
    Sets the amount of treble content to saturate: The "Boost" setting emphasizes the treble content extra clarity and presence. The "Flat" position leaves this register untouched while the "Cut" position will reduce the amount of high frequencies being saturated.
    Grunt Switch
    Sets the amount of low frequency content to saturate by selecting between three different bass boost levels before the clipping stage.
    Bass
    +-12dB @ 100Hz
    Lo Mids
    +-12dB switchable 250Hz, 500Hz and 1kHz
    Hi Mids
    +-12dB switchable 750Hz, 1.5KHz and 3kHz
    Treble
    +-12dB @ 5kHz
    Direct Ouput
    Balanced XLR output for connecting the pedal to a microphone preamp, PA system etc.
    Ground lift
    Disconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the ¼” output.
    Cab Sim
    Toggle the cabinet simulation on/off on the Direct Output. This switch completely bypasses all digital circuits and allows you to get a zero latency signal when needed.
    Headphones
    B7K Ultra has an internal stereo headphone amplifier capable of driving a minimum load of 16 ohms from the 3.5mm stereo jack. Use the Master volume control to adjust the level.
    USB
    A Micro USB B connector allows you to connect the pedal to PC/Mac to load cabinet simulation impulse responses to the pedal and control various other settings.
    Aux In
    This 3.5mm stereo input allows you to practice with backing tracks from e.g. your smartphone or laptop. Auxiliary input can only be used with the headphone output. The pedal does not control the level, it must be set from your audio source. Remember to always first set the level low before connecting anything to the aux in!
    Features/Specs
    The upgraded Microtubes B7K Ultra features all the versatility and sonic possibilities of the first version plus :
    Single user loadable cabinet simulation impulse response.
    Micro-USB B port to connect to PC/Mac to load a different Virtual Cabinet through the Darkglass Suite.
    5mm headphone output with cabinet simulation.
    Balanced XLR output with switchable cabinet simulation.
    We are authorized dealers for all these brands. Click a logo to see our listings.
    ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge.
    If an item is refused by the buyer, ship costs to and from the destination in which the item was shipped to are not refunded. Please note the cost of return shipping is usually double of what the original ship cost.
    Shipping is not free to HI, AK, and PR. FREE SHIPPING ONLY TO THE LOWER 48 STATES.
    We provide free shipping to the contiguous 48 United States, on most items.
    Shipping fees to ALL OTHER LOCATIONS will be calculated individually and added to customer invoices. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. In the event that the customer refuses a shipment, all shipping costs to and from the country or State in which the item was shipped to are not refunded. Please note, in some cases return shipping can cost as much as double the original ship cost.
    We operate a 30-day return period. Items must be returned with all original packaging as well as all included items. Items that are not returned in original, resalable condition are subject to a 15% restocking fee. We charge a 15% restocking fee on returned items only if the item is clearly used and or the packaging is tarnished. A 10% re-stock is more likely if the unit comes back in mint condition. The ship cost we paid to ship your item will be deducted as well. In some cases restock fees and ship costs can be applied as a store credit.
    We will exchange a defective unit for the same unit within the 30-day period. After that period, you will have to work directly with the manufacturer for warranty service.
    Items that can not be returned include: software, units with contents or packaging that is damaged/missing, and items that are considered for personal use (such as earphones, headphones, microphones, instrument mouthpieces, harmonicas or other items that you wouldn't want to purchase if someone else had previously used them). Also, Items which we do not normally stock (i.e. "Special Orders", discontinued products, close-outs, used products, etc.) are non-returnable. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order.
    Please contact us for a Return Authorization before returning any items.