Phil Jones Bass PE-5 Preamp, DI Box & 5-band EQ Pedal w/ Rechargeable Battery

Description

Brand New
w/ Warranty. We are an authorized Phil Jones Bass dealer.
One pedal to throw in front of any rig. The PE-5 serves as a preamp, a direct box and a signal booster. In addition to a mute switch, you have an engage switch that allows you to bypass or activate your EQ and gain controls, perfect if your “dry” signal is your baseline and you want a particular EQ or boost for a secondary tone. This method works especially well into the front of an amp. Or, use the pedal as an always-on direct box to tailor your tone before sending your signal directly to your sound engineer or recording interface.
What we think:
Extremely powerful 5-band EQ
Lo-Bass EQ band lets you dial in the sub bass and contours a low B string perfectly
Hi-Bass is situated nicely to control any unwanted low frequency buildup in the room
Lo- and Hi- Trebles put extra growl or pick attack right at your fingertips
Piezo/Magnetic switch changes the impedance at the input to match different instruments
¼” output and pre/post-switchable XLR output provides plenty of flexibility
Rechargeable lithium-ion battery means you can leave your power supply at home
We also stock a variety of Phil Jones heads and speaker cabinets. Contact us for bundle pricing!
Specifications
Model:
PE-5 Pedal
Input:
¼” Phone
Impedance Piezo (“PZ”) = 4.7MΩ
Impedance Magnetic (“MG”) = 2MΩ
Maximum input before clipping – 4 Volts (peak to peak)
Gain Range:
From -6 dB to +6 dB
EQ
LO -BASS: Level ±12 dB (Freq. 50Hz)
HI-BASS: Level ±15 dB (Freq. 160 Hz)
MID: Level ±15 dB (Freq. 630KHz)
LO-TREBLE: Level ±15 dB (Freq. 2.5 KHz)
HI-TREBLE: Level ±15 dB (Freq. 12 KHz)
Outputs:
UNBALANCED 1/4” JACK
BALANCED DI OUT with transformer (GND switch)
Controls:
GAIN / LEVEL
Switches:
Bypass | MUTE | ON/OFF | PRE/POST
Power Requirement:
9VDC - 1A from separate 9volt 1 amp (minimum) adaptor
Dimension (W x D x H):
120 x 95 x 37 mm
Weight:
450 grams